Forks

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (48 x 52 x 15mm)
- 1 inner bushing, Teflon outside (49 x 47 x 20mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (49 x 52 x 15mm)
- 1 inner bushing, Teflon outside (50 x 48 x 20mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (48 x 52 x 15mm)
- 1 inner bushing, Teflon outside (49 x 47 x 20mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (47 x 51 x 15mm)
- 1 inner bushing, Teflon outside (48 x 46 x 20mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (50 x 55 x 15mm)
- 1 inner bushing, Teflon outside (51 x 49 x 20mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (49 x 52 x 15mm)
- 1 inner bushing, Teflon outside (50 x 48 x 20mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

- Includes upper & lower guide & slide bushings, copper washers and fork seal snap rings. - Teflon coated bushings for increased durability. - Proven results from dynamic testing on durability, can handle 500.000 strokes with less wear than the original! - Complete sets for easy install.
Fork restoration tip! To guarantee optimum results, always change your fork oil and use new oil seals when you change the bushings in the front fork. Your old fork oil contains small particles of dirt that will wear the new bushings down very quickly. Don't forget to buy new dust seals, oil seals and fork oil while you are here!

Fork Fitment: White Power 48mm
*Replaces the traditional metal ring* SKF Fork Slider kit comes with x2 fork sliders and some stainless steel cotter pins. SKF's expertise is built on the development, design and manufacture of bearings, seals and lubrication systems. SKF have been studying how friction and materials work with each other since 1907! They modified them perfectly for every occassion, so you can enjoy the most specialized motorcycle fork seals ever created ! Its innovative design allows it to be applied directly on the fork and closed by means of cotter pins. It uses the SKF's polyurethane material ­X-ECOPUR patented polymer.

Fork Fitment: Showa 47/48mm
*Replaces the traditional metal ring* SKF Fork Slider kit comes with x2 fork sliders and some stainless steel cotter pins. SKF's expertise is built on the development, design and manufacture of bearings, seals and lubrication systems. SKF have been studying how friction and materials work with each other since 1907! They modified them perfectly for every occassion, so you can enjoy the most specialized motorcycle fork seals ever created ! Its innovative design allows it to be applied directly on the fork and closed by means of cotter pins. It uses the SKF's polyurethane material ­X-ECOPUR patented polymer.

Fork Fitment: Marzocchi 50mm
*Easy Removable* SKF Fork Mud Sraper kit comes with x2 mud scrapers and some stainless steel cotter pins. SKF's expertise is built on the development, design and manufacture of bearings, seals and lubrication systems. SKF have been studying how friction and materials work with each other since 1907! They modified them perfectly for every occassion, so you can enjoy the most specialized motorcycle fork seals ever created ! Developed specifically for the demands of off-road and racing motorcycles, SKF’s fork mud scraper kit is an innovative solution providing increased fork seal life and performance. The kit reduces mud and water contamination of fork seals and can be installed without removing fork or wheel. In addition to the innovative design, the fork mud scraper kit uses the polyurethane material ­X-ECOPUR, an SKF proprietary material characterized by high abrasion resistance along with excellent smoothness.