Forks

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (46 x 50 x 12mm)
- 1 inner bushing, Teflon outside (47 x 45 x 20mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (46 x 50 x 15mm)
- 1 inner bushing, Teflon outside (47 x 45 x 20mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (47 x 43 x 20mm)
- 1 inner bushing, Teflon outside (45 x 50 x 15mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (37 x 41 x 12mm)
- 1 inner bushing, Teflon outside (36 x 38 x 20mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

New SKF Fork Bushings kit, composed of:

- 1 outer bushing, Teflon inside (35 x 38 x 12mm)
- 1 inner bushing, Teflon outside (36 x 34 x 15mm)

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer.
The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation.
To protect the bushings from corrosion, the steel backing is copper-plated.
The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling.
During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

- Includes upper & lower guide & slide bushings, copper washers and fork seal snap rings. - Teflon coated bushings for increased durability. - Proven results from dynamic testing on durability, can handle 500.000 strokes with less wear than the original! - Complete sets for easy install.
Fork restoration tip! To guarantee optimum results, always change your fork oil and use new oil seals when you change the bushings in the front fork. Your old fork oil contains small particles of dirt that will wear the new bushings down very quickly. Don't forget to buy new dust seals, oil seals and fork oil while you are here!

- Includes upper & lower guide & slide bushings, copper washers and fork seal snap rings. - Teflon coated bushings for increased durability. - Proven results from dynamic testing on durability, can handle 500.000 strokes with less wear than the original! - Complete sets for easy install.
Fork restoration tip! To guarantee optimum results, always change your fork oil and use new oil seals when you change the bushings in the front fork. Your old fork oil contains small particles of dirt that will wear the new bushings down very quickly. Don't forget to buy new dust seals, oil seals and fork oil while you are here!

- Includes upper & lower guide & slide bushings, copper washers and fork seal snap rings. - Teflon coated bushings for increased durability. - Proven results from dynamic testing on durability, can handle 500.000 strokes with less wear than the original! - Complete sets for easy install.
Fork restoration tip! To guarantee optimum results, always change your fork oil and use new oil seals when you change the bushings in the front fork. Your old fork oil contains small particles of dirt that will wear the new bushings down very quickly. Don't forget to buy new dust seals, oil seals and fork oil while you are here!

*Does not fit DRZ400SM, please see product 39.160076 for SM models* - Includes upper & lower guide & slide bushings, copper washers and fork seal snap rings. - Teflon coated bushings for increased durability. - Proven results from dynamic testing on durability, can handle 500.000 strokes with less wear than the original! - Complete sets for easy install.
Fork restoration tip! To guarantee optimum results, always change your fork oil and use new oil seals when you change the bushings in the front fork. Your old fork oil contains small particles of dirt that will wear the new bushings down very quickly. Don't forget to buy new dust seals, oil seals and fork oil while you are here!

- Includes upper & lower guide & slide bushings, copper washers and fork seal snap rings. - Teflon coated bushings for increased durability. - Proven results from dynamic testing on durability, can handle 500.000 strokes with less wear than the original! - Complete sets for easy install.
Fork restoration tip! To guarantee optimum results, always change your fork oil and use new oil seals when you change the bushings in the front fork. Your old fork oil contains small particles of dirt that will wear the new bushings down very quickly. Don't forget to buy new dust seals, oil seals and fork oil while you are here!